SHIPSHAPE PRIMER-UNDERCOAT by Norglass is the ultimate high-build performance epoxy coating to obliterate background irregularities and provide filling properties prior to coating with single or 2 pack finishes.
Use as a primer and undercoat for timber, fibreglass, aluminium and concrete, as well as an undercoat over Norglass NORSHIELD ANTI-CORROSIVE PRIMER on steel surfaces, and all areas where Northane colours are to be applied.
Grey Shipshape Primer/Undercoat is best for priming under strong colours. White Shipshape Primer/Undercoat for priming under lighter colours such as white & pastels.
Suitable for areas of continuous immersion and osmosis repairs.
Commonly used as a primer-undercoat for non-ferrous metals and as a topcoat in the bilge area of boats because of its satin gloss finish. SHIPSHAPE is the preferred primer for fibreglass.
IMPORTANT: This product is the Hardener Component of a TWO PACK product. This product is the hardener component only. You will need the Base Component too (sold only in a kit), and the two must be mixed together before use.
MIXING RATIO: 3 base:1 hardener by volume.
COVERAGE: Up to 10 sqm per litre
APPLY: Brush, roller or spray (thin with Northane Spraying Thinner)
CLEANUP: Norglass Epoxy Thinner
MORE INFORMATION
- Download the Norglass Catalogue & Product Guide
- Download Product Data Sheet
- Download Safety Data Sheet for Base
- Download Safety Data Sheet for Hardener
| Part Number | Size |
|---|---|
| NOR-4085 | 125ml |
| NOR-4084 | 250ml |
| NOR-4089 | 500ml |
| NOR-4083 | 1 Litre |
| NOR-4086 | 2.5 Litres |
